Denison Type T6 T7 Series Triple Vane Pump | T6DCC, T6EDC, T7EDC, T7EECS | High Pressure

Denison Type T6/T7 Series High-Pressure Triple & Double Vane Pumps

Product Overview: The Denison T6 and T7 Series multiple vane pumps are the premier solution for multi-circuit power distribution in complex hydraulic systems. By integrating three independent cartridges onto a single drive shaft (e.g., T6DCC, T6EDC), this series can simultaneously power high-pressure clamping, medium-pressure execution, and low-pressure auxiliary circuits, significantly simplifying system plumbing. This selection features heavy-duty models: T6DCC-050-020-010-2R1S-B101 (Triple configuration), T6EDC, T7EDC, T7EECS, and T67DCB. Powered by patented Double-lip Vane technology, these combination pumps maintain exceptionally stable flow and ultra-quiet performance even under continuous loads up to 24.0 – 30.0 MPa.

Key Technical Advantages:

• Independent Multi-Circuit Output: Supports flexible combinations from double to triple pumps (e.g., E+D+C or D+C+C frame sizes), allowing for precise flow distribution from a single motor drive.

• Patented Double-lip Vane Durability: The unique double-lip structure minimizes contact stress on the stator surface, providing superior fatigue resistance under high-pressure 4000 PSI cycles.

• Modular Cartridge Maintenance: Each pump core is an independent “drop-in” unit. Maintenance is streamlined—swap the specific internal cartridge on-site without dismantling heavy housings or primary piping.

• Robust Load Stability: The rugged ductile iron housing is built to withstand rigorous industrial shocks, ensuring long-term stability in high-frequency cycle applications like injection and brick pressing.

• Target Applications: 1000-ton brick presses, scrap metal balers, large-scale injection molding machines, oil rig power units, and marine hydraulic machinery.

Detailed Models & Parameters:

• Core Series: Denison Type T6DCC, T6EDC, T6GCC, T7EDC, T7EECS, T7DDB, T67DCB.

• Model Keywords: T6DCC-050-020-010-2R1S-B101.

• Displacement Rating Example (cm³/rev):

  • P1 (Large End – E/D Series): 158.0 (050).

  • P2 (Medium End – D/C Series): 66.0 (020).

  • P3 (Small End – C/B Series): 32.9 (010).

• Technical Specs Decoding:

  • 2R: Specific shaft configuration (e.g., reinforced keyed or splined) and Right-hand (Clockwise) rotation.

  • 1S: Seal material (Viton) and specific porting/mounting codes.

  • B101: Design sequence identifier.

• Max Operating Pressure: Rated for continuous operation up to 24.0 – 30.0 MPa (240 – 300 Bar).