Denison Type T7 T67CBW Vane Pump | T7DC, T6CCW | 024-69370-0 | 30MPa

Denison Type T7 & T67 Series High-Pressure & High-Flow Vane Pumps

Product Overview: The Denison T6 and T7 Series are globally recognized benchmarks for high-pressure fixed displacement vane pumps. Engineered for heavy-duty, high-pressure, and high-speed environments, this series features Denison’s patented Double-Lip Vane technology. This page highlights premium models: T67CBW-022-B10-WR00-A1M1, Part Number 024-69370-0, and the full range of double pump configurations: T7DC, T67CB, T67CBW, T67DCW, and T6CCW. With exceptional anti-cavitation properties and peak operating pressures up to 30.0 MPa (300 Bar), this series is the definitive choice for marine engineering, injection molding, and large-scale industrial presses.

Key Technical Advantages:

• Patented Double-Lip Vane Technology: This unique structure minimizes vane-tip loading against the stator, ensuring maximum volumetric efficiency and fatigue resistance even under continuous 4000 PSI cycles.

• Extreme High-Pressure Capability: The T7 series is rated for pressures up to 30.0 MPa, significantly higher than conventional vane pumps, delivering stable torque output under extreme loads.

• Flexible Double Pump Configuration: T67CBW/T67DCW architectures allow for two different displacement cartridges on a single shaft, ideal for independent dual-circuit control or combined high-flow output.

• Rapid “Drop-in” Cartridge Maintenance: The internal modular cartridge allows for on-site replacement without disconnecting heavy housings or primary plumbing. Restore OEM-level performance in minutes, drastically cutting downtime.

• Target Applications: Injection molding machines, brick presses, marine cranes, offshore drilling rigs, scrap balers, and industrial Hydraulic Power Units (HPU).

Detailed Models & Parameters:

• Core Series: Denison Type T6, T7 Series (T7DC, T67CB, T67CBW, T67DCW, T6CCW).

• Model Keywords: T67CBW 022, 024-69370-0, T6CCW, T7DC.

• Displacement Rating Example:

  • 022: P1 end displacement size (e.g., 70.3 cm³/rev).

  • B10: P2 end displacement size (e.g., 32.5 cm³/rev).

• Technical Specs Decoding:

  • WR00: Specific shaft configurations (Splined or Keyed).

  • A1M1: Porting orientation and flange configuration codes.

  • W: Denotes reinforced frame for higher speed and pressure demands.

• Max Pressure Rating: Continuous pressure 24.0 – 28.0 MPa; intermittent peaks up to 30.0 MPa (300 Bar / 4350 PSI).

• Speed Range: Rated operating speeds between 600 and 2800 RPM.